Installation Site Preparation; General Information; Safety Precautions; Stove Installation Site - Palazzetti MULTIFIRE ARIA Notice D'installation

5 INSTALLATION SITE
PREPARATION

5.1 GENERAL INFORMATION

The following paragraphs provide instructions that
must be complied with in order to ensure maximum
The following instructions are however subordinate
to compliance with any national, regional and local
laws and standards in force in the country where
the product is installed.

5.2 SAFETY PRECAUTIONS

Responsibility for work carried out in the place
where the stove is installed lies with the user;
the user is also responsible for making sure the
installation checks are completed.
The user must abide by all local, national and
European safety requirements.
suitable load-bearing capacity.
The stove assembly and dismantling instructions
are reserved exclusively for specialist technicians.
Users should always contact our service centre
technicians.
Before having work performed by other technical
personnel verify
competence.
38/144
INSTALLATION
their effective technical

5.3 STOVE INSTALLATION SITE

The enclosed "Product technical details" show the
minimum clearances from combustible materials
and objects expressed in centimetres that must
be observed when positioning the stove; for non-
halved.
to excessive heat.
wood, parquet, linoleum, laminates or carpets
base underneath stove. Such base may be made
from steel, slate, glass or stone and must cover
at the front.
The manufacturer declines all liability for any
alterations to the characteristics of the material
base.
Any elements made from wood (e.g. beams) or
other combustible material located near the stove
Flammable walls or objects must be at least 120
cm away from the heat radiation area at the front
of the stove.
Leave enough clearance for maintenance work.
materials is observed, as shown on the pipes used
Pi = Combustible wall
Pp = Floor protection
Pi
120 cm
cod. 004771981 - 05/2015 - Palazzetti - PN - Italy
Pp
Fig. 5.2