Güde KS 400-41 V Mode D'emploi D'origine page 41

Delimbing a tree
The process of delimbing involves removal of
branches from a felled tree. When delimbing, leave
larger lower branches as supports to keep the tree
above the ground. Remove smaller branches in one
cut. Branches under tension should be cut from bot-
tom to top to avoid jamming the chain saw.
Sawing tensioned wood
Tensioned wood is a trunk, branch, rooted stump or
sapling bent under tension by other wood and which
rebounds when the other wood is cut or removed.
For a felled tree, it is very likely that a rooted stump
will return to its upright position when the trunk is
separated from the stump when it is being cut to
length. Pay attention to tensioned wood, as this is
very dangerous.
Bumper spike
10
The integrated bumper spike can be used as a pivot
point when making a cut. It is helpful to keep the
body of the saw stable when sawing. When sawing,
push the machine forward until the metal pins
penetrate the wood edge, then lift the rear handle
up or down in the direction of the cut to reduce the
physical strain on sawing.
Maintenance and transport
Before carrying out any work on the machine,
switch off the engine and pull out the spark plug
connector. Wait until the unit has cooled down.
Repairs and work not described in this manual should
only be carried out by qualified personnel.
Only use original accessories and original spare parts.
Allow the engine to cool down; empty the fuel
tank and secure the machine from slipping before
transporting it in a vehicle. This ensures prevention of
petrol leakage, damage or injury.
Always transport a chain saw with the scabbard
attached.
Only use biodegradable chain oil
Always keep the machine clean, especially the ventila-
tion slots. Never spray the unit body with water!
Do not clean the machine and its components with
solvents, flammable or toxic liquids. Only use a damp
cloth for cleaning.
Use an environmentally friendly oil for all moving
parts.
Clean the saw chain and the guide bar carefully after
each use. Rub it with an oily cloth or spray it with a
metal maintenance spray.
Blunt, bent or damaged chains and guide bars must
be replaced.
Only a regularly serviced and well-maintained ma-
chine can be a useful tool. Lack of maintenance and
care can lead to unforeseeable accidents and injuries.
If required, you can find the spare parts list online at
www.guede.com.
Store the machine in a dry place.
Warranty
The warranty period is 12 months for commercial use,
24 months for consumers, and begins with the date of
purchase of the machine.
The warranty exclusively covers defects attributable
to material or manufacturing defects. In the event
of the assertion of a defect within the meaning of
the warranty, the original proof of purchase must be
enclosed with the date of sale.
The warranty does not cover improper use, e.g.
overloading the machine, use of excessive force,
damage caused by external influences or foreign
objects. Non-observance of the operating
instructions and normal wear and tear are also
excluded from the warranty.
Important customer information
Please note that returns within or outside the
warranty period should always be in the original
packaging. This measure effectively avoids un-
necessary transport damage and any associated
disputes. Your equipment is optimally protected
only in the original box and this will ensure
smooth processing.
Service
Do you have a technical question? A complaint? Do
you need spare parts or operating instructions? We
can help you quickly and easily in the Service section
of the homepage of Güde GmbH & Co. KG (www.
guede.com). Please help us to help you. In order to be
able to identify your machine in the event of a com-
plaint, we need the serial number, the item number
and year of manufacture. All this data can be found
on the rating plate.
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
Email: support@ts.guede.com
ENGLISH
37