Filter Maintenance - Tennant S8 Mode D'emploi Et Pièces Détachées

5.3 -FILTER MAINTENANCE

Cleaning the filter
The filter is one of the machine's main components. It is essential to
achieve the best results from your machine. If you notice that dust forms
when the machine is at work, check the filter.
The filter is cleaned as follows:
Press and release the lever of the appropriate filter shaker pos.7 Fig. 3 .
The lever operates a rod that will unclog the filter. Repeat this operation
5 or 6 times.
ATTENTION: the filter features an arrow that shows you the direction in
which it should be fitted (4 Fig.6 ).
Dusty environments
If you are using the machine in a particularly dusty environment it is wise
to use the filter shaker more frequently.
Replacing the filter
Every 200 hours of work, the filter must be replaced.
Follow the fig.6 :
- open the handles 1
- turn of 180° the holders 2
replace the filter 3
-
- arrow 4 must follow the air flow "from the external to the internal of
the machine"
After the filter has been assembled, make sure the gasket and filter are
dust tight.
WASTE MUST BE DISPOSED OF IN ACCORDANCE TO THE LAW.
1
3
2 4
Fig. 6
2 1
Fig. 6
10