Controls - Tennant S8 Mode D'emploi Et Pièces Détachées

3.1 - CONTROLS

1 9 2 4
1) Side brush control lever: switch the lever to lower position and
the side brush will move into the work position and start spinning.
To stop the side brush, switch the lever to upper position.
2) Key switch: turns power to the machine on.
3) Power indicator light .
4) Charge indicator light this light indicates the state of the battery
during operation.
5) Vacuum indicator light.
8 6
7
1
2
6) Traction lever : By pulling this lever, the machine will start moving
forward
7) Filter shaker lever: this lever operates the filter shaker to clean the
filter (see the section on filter maintenance).
8) Vacuum fan switch.
9) Lever for the dust flap for bulky debris
7
3 4 5
8
Fig. 3