Replacing And Adjusting The Side Brush; Replacing And Adjusting The Main Brush - Tennant S8 Mode D'emploi Et Pièces Détachées

5.4 -REPLACING AND ADJUSTING THE SIDE BRUSH

Replacing
After lifting the front part of the machine, replace the side brush by
removing the brush fixing screw Fig.2/A , and removing the brush.
Replace the brush and secure the new one in place with the screw and its
washer.
Adjusting
The side brush is adjusted by slackening the screws pos.1 Fig.6/A and
using the slots to position the brush at the required height.
Once you have positioned it, tighten the two screws.
5.5 -REPLACING AND ADJUSTING THE MAIN
BRUSH
Replacing (Fig.6/C)
To replace the main brush, remove the front bin and slacken the
four fixing screws to remove the brush.
When mounting a new brush, pay attention to the direction in
which the brush will spin: it must direct dirt toward the centre of
the machine.
Adjusting (Fig.6/B)
To adjust the main brush, remove the top guard, slacken the lock
nut pos.1 Fig.6/B and turn adjusting handle pos.2 Fig.6/B in
the direction required (counter clockwise to increase pressure).
Once the brush has been adjusted, tighten the lock nut again.
1
Fig. 6/A
Fig. 6/A
11
2
1
Fig. 6/B
Fig. 6/B
Fig. 6/C