Machine Maintenance; After Each Use - Tennant NOBLES SPEED SCRUB Manuel Opérateur

OPERATION
EN

MACHINE MAINTENANCE

To keep the machine in good working condition, simply
follow the machine's maintenance procedures.
FOR SAFETY: Before performing maintenance
procedures turn off machine and unplug power
cord from wall outlet.
ATTENTION: Contact an Authorized Service Center
for machine repairs.

AFTER EACH USE

1. Wipe clean the power cord and inspect it for
damage (Figure 20). Wrap power cord around
handle and cord hook when not in use (Figure 21).
FIG. 20
WARNING: Electrical Hazard, Do Not Operate
With Damaged Power Cord.
If the power cord is damaged or broken, it must be
replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a
hazard.
2. Empty the recovery and solution tanks and
thoroughly rinse with clean water (Figure 22).
FIG. 22
10
FIG. 21
3. Clean the vacuum shut- off float (Figure 23) and
the vacuum intake screen of any debris buildup
(Figure 24).
FIG. 23
4. Clean the solution hose screen (Figure 25).
FIG. 25
5. Remove and clean the brush (Figure 26). Replace
brush if worn.
FIG. 26
6. Clean the underside of the scrub head (Figure 27).
FOR SAFETY: Before tipping machine back,
unplug power cord from wall outlet.
FIG. 24
Nobles Speed Scrub (03- 08)