Machine Maintenance; Daily Maintenance - Tennant 1530 Manuel De L'opérateur

OPERATION

MACHINE MAINTENANCE

To keep machine in good working condition, simply
follow daily, weekly and monthly maintenance
procedures.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off machine
and unplug cord from wall outlet.
ATTENTION: Contact an Authorized Service
Center for machine repairs. Machine repairs
performed by other than an authorized person will
void your warranty.

DAILY MAINTENANCE

(Every 4 Hours of Use)
1. Inspect the cord grip and power cord for damage
(Figure 20). Replace immediately if damaged.
FIG. 20
WARNING: Do Not Operate With Damaged
Power Cord. Do Not Modify Plug. Unplug power
Cord Before Servicing Machine.
If the supply cord is damaged or broken, it must
be replaced by the manufacturer or it's service
agent or a similarly qualified person in order to
avoid a hazard.
2. Drain the recovery tank and rinse it out thoroughly
(Figure 21).
FIG. 21
14
3. Remove the recovery tank plug and flush out the
recovery intake opening with water (Figure 22).
FIG. 22
4. Remove and rinse off the float shut-off screen
located in recovery tank (Figure 23).
FIG. 23
5. Remove any entangled carpet fibers and debris
from the brush base (Figure 24).
FIG. 24
Tennant 1530 (12- 02)