Machine Maintenance - Tennant T3 Opérateur Manuel Et Liste Des Piéces

MACHINE MAINTENANCE

To keep the machine in good working condition, simply
follow the daily, monthly and quarterly maintenance
procedures.
WARNING: Electrical Hazard. Disconnect
Battery Cables Before Servicing Machine.
DAILY MAINTENANCE (After Every Use)
1. Drain and clean out the recovery tank (Figure 37).
FIG. 37
2. Remove and clean the float shut--off screen
located in the recovery tank (Figure 38).
FIG. 38
3. Drain the solution tank and rinse out the inside
with hot water, 60°C (140°F) maximum
temperature, as needed (Figure 39)
FIG. 39
Tennant T3 (04- -05)
Home Find... Go To..
4. Remove and clean the solution tank filter (Figure
40). Turn the filter counter--clockwise to remove.
FIG. 40
5. Remove the pad/brush and clean. Rotate pad or
replace when worn (Figure 41).
FIG. 41
6. Wipe the squeegee blades clean (Figure 42).
Store the squeegee assembly in the raised
position to prevent blade damage.
FIG. 42
OPERATION
17