Honeywell RG500 Mode D'emploi page 17

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
7 — 5 MINIMUM WORKING HEIGHT
Before using RG500 Auto/Manual Rope Grab check a minimum space clearance below the user's feet as necessary,
to prevent any collision with the structure or the ground (Fig. 18,19).
For allowed minimum clearance see the table below:
Designation EN
Reference
RG500 Anchor Line 5m
1035948
RG500 Anchor Line 10m
1035947
RG500 Anchor Line 15m
1035946
RG500 Anchor Line 20m
1035945
RG500 Anchor Line 25m
1035944
RG500 Anchor Line 30m
1035943
RG500 Anchor Line 40m
1035942
RG500 Anchor Line 50m
1035941
MAXIMUM ALLOWED LENGTH OF THE ANCHORAGE LINE IS 50 METERS.
For lenghts not shown in the table above must be used the closest higher value; e.g. 27m flexible anchor line
must use the same air clearance as the anchore line 30m (1035943).
7 — 6 SUPPLIED FLEXIBLE ANCHOR LINE
For flexible anchor lines, where is missing anchorage loop and karabiner (1035940 & 1035939) must be use the
figure-eight knot (see Fig.13a) and karabiner (conforming EN 362). For lower end of flexible anchor line must be
use simple knot with sufficient length (min 0.1m) of rope under this knot (see Fig.13b). Total length of this flexible
anchorage line must not exceed 50 meters.
Diameter:
Type:
Color:
Number of Cores:
Number of Cops:
Number of threads:
8 -
PERIODIC INSPECTION
This equipment must be inspected at least once a year. A competent person, properly trained and qualified, must in-
spect this equipment in compliance with these instructions and appropriate details of the inspection must be recorded.
At each periodic inspection, complete the form Appendix number V and attach a new inspection label with the next
inspection date. The frequency of examination shall be increased according to the applicable regulations.
Warranty is void if periodic inspections are not performed and tracked as described above.
If you detect any failure or damage to your product, or if you have any doubts regarding its safety, the PPE must
be immediately withdrawn from service and returned to the manufacturer or an authorized service centre for
inspection or disposal.
for vertical use (m)
140 kg
1035951
1035950
2.1
3.2
2.3
3.4
2.4
3.5
2.5
3.6
2.6
3.7
2.7
3.8
2.9
4.0
3.1
4.2
SUPPLIED FLEXIBLE ANCHOR LINE
12mm
Kernmantle rope
Black with green pattern
10
32
12
AIR CLEARANCE
for horizontal use (m)
200 kg
1035949
1035951
1035951
4.8
3.5
5.1
5.0
3.7
5.3
5.1
3.9
5.4
5.2
4.1
5.5
5.3
4.3
5.6
5.4
4.5
5.7
5.6
5.0
5.9
5.8
5.5
6.1
Material:
Polyamide and Polyester
Elongation:
1.60%
Abrasion resistance:
98%
Breaking strength:
min 37kN
Treatment:
Anti UV
Edge tested:
YES
140 kg
1035950
1035949
6.2
7.8
5.4
8.0
5.5
8.1
6.6
8.2
6.7
8.3
6.8
8.4
7.0
8.6
7.2
8.8
17

Publicité

Table des Matières
loading

Table des Matières