Machine Programme - Migatronic PILOT 1800 E Manuel D'instruction

PILOT 1800/2400 is a line of portable welding
machines, especially designed for welding where
weight and dimensions have to be small.
The machine is available in six versions:
PILOT 1800 E
PILOT 1800 H
PILOT 1800 HP
All versions are included in this instruction manual.
PILOT 1800 E / 2400 E
MMA welding machines with a max. current of re-
spectively 180 A and 240 A. The machine has ad-
justable Arc-power and hot start and can be
equipped with connection for external adjustment.
PILOT 1800 H / PILOT 2400 H
MMA and TIG welding machines with a max. current
of respectively 180 A and 240 A. The machine has
adjustable Arc-power and hot start for MMA welding
and adjustable pre-flow, post-flow and slope-down
for TIG welding. Moreover, it possible to choose be-
tween 2-times and four times welding and between
HF and LIFTIG ignition. The machine can be
equipped with connection for external adjustment
and connection for cooling module for torch cooling.
PILOT 1800 HP / PILOT 2400 HP:
MMA and TIG welding machines with a max. current
of respectively 180 A and 240 A. Moreover, the
machine can be used for pulse welding. In
connection with pulse welding it is possible to adjust
pulse time, pause time and base amp. The machine
has a pilot arc. The machine has adjustable Arc-
power and hot start for MMA welding and adjustable
pre-flow, post-flow, starting current, slope-up, re-
duced current, slope-down, and stop current for TIG
welding. Moreover, it possible to choose between
two-times, four-times and spot welding and between
HF and LIFTIG ignition. The machine can be
equipped with connection for external adjustment
and connection for cooling module for torch cooling.
The machine memorises 8 and 16 complete welding
settings respectively.
Transportation equipment
The MIGATRONIC programme includes a transport
trolley and shoulder strap which can be used for alle
PILOT versions.
Hoses
The machine can be equipped with TIG welding
hoses, electrode holders and return current cables
from the MIGATRONIC programme. If a TIG torch
with adjustment is used, the welding current can be
adjusted from the torch.

MACHINE PROGRAMME

PILOT 2400 E
PILOT 2400 H
PILOT 2400 HP
External adjustment
Remote control and foot control units can be de-
livered to PILOT machines with connection for
external adjustment.
Torch cooling module
A torch cooling module can be delivered to PILOT
machines with TIG which enables use of TIG
welding torches from the MIGATRONIC programme.
14