Accessories; Product Programme - Migatronic SIGMA2 300 Compact Manuel D'instruction

2
SIGMA 300/400/500 Compact/STB:
300/400/500A welding
MIG/MAG welding. The machine is air-cooled and is
supplied with integrated trolley and built-in wire feed in
Compact version.
As STB version the machine is delivered with
integrated trolley and separate wire feed unit.
Both wire feed units are delivered with 4-roll drive.
Welding hoses and cables
MIGATRONIC's product range can provide electrode
holders, MIG/MAG torches and hoses, return current
cables, intermediary cables and wear parts etc.
Push pull (option)
2
SIGMA 300/400/500 can be retrofitted with extra
equipment; thereby a MIGATRONIC Push Pull torch
can be connected and used.
Torch cooling (option)
When ordering the machine, an integrated cooling
module can be ordered, which enables both water-
cooled and gas-cooled welding torches to be used.
Trolley with unit for changable voltage (option)
A trolley with a built-in unit which automatically adjusts
the actual three-phased mains voltage (230-500 V) to
2
the SIGMA .
Intelligent Gas Control (Option)
Gas saving kit, which automatically adjusts the gas
flow.

Accessories

Please contact your Migatronic dealer for further
2
information on SIGMA accessories.

PRODUCT PROGRAMME

machine for MMA and
19