Données Techniques - Migatronic PILOT 1800 E Manuel D'instruction

DONNEES TECHNIQUES
Source de courant:
Tension d'alimentation
Fusible
Puissance max.
Rendement
Charge admissible
- facteur de marche 35% (à 40°C)
- facteur de marche 60% (à 40°C)
- facteur de marche 100% (à 40°C)
Tension à vide
Plage d'intensité
1
Classe d'utilisation
2
Classe de protection (IEC 529)
Norme
Encombrement
Poids (E-modèle)
Poids (H & HP-modèles)
Module de refroidissement de la torche:
Capacité de refroidissement
Réservoir, capacité
2
Classe de protection
Encombrement
Poids
Fonction:
Stabilisation de l'arc réglable
Surintensité à l'amorçage
Anti-collage de l'électrode
Arc pilote
Courant d'amorçage
Courant d'arrêt
Durée de la montée progressive du courant TIG
Durée d'évanouissement
Durée du pre-gaz
Durée du post-gaz
Durée du soudage par points
Largeur d'impulsion
Temps d'arrêt
Courant de base
Courant de repos
Réglages des travaux de soudage
1 S
Ce poste de soudage remplit toutes les demandes posées aux
postes de soudage qui s'utilisent dans les domaines où il y a un
risque élevé de chocs électriques.
2
La machine est construite pour l'utilisation à l'extérieur parce qu'elle
remplit les demandes de la classe de protection IP 23. Cela en vaut
qu'en supposant que la machine soit placée en position normale.
PILOT 1800 PILOT 2400
3x400 V ±15% 3x400 V ±15%
10 A 16 A
5,76 kW 8,64 kW
0,85 0,85
180 A 240 A
140 A 200 A
110 A 160 A
85 V 85 V
5 – 180 A 5 – 240 A
S S
IP 23 IP 23
EN/IEC60974-1 EN/IEC60974-1
EN/IEC60974-10 EN/IEC60974-10
22x40x50 cm 22x40x50 cm
18 kg 18 kg
20 kg 20 kg
0,5 kW 0,5 kW
2,2 litres 2,2 litres
IP 23 IP 23
22x21x50 cm 22x21x50 cm
26 kg 26 kg
Proces PILOT 1800/2400
MMA 0-150 %, max. 180/240 A
MMA 0-100 %, max. 180/240 A
TIG/MMA toujours active
TIG 4 %, min. 5 A
TIG 0-100 %, min. 5 A
TIG 0-100 %, min. 5 A
0-10 s
TIG 0-10 s
TIG 0-60 s
TIG 3-20 s
TIG 0,1-50 s
TIG/MMA 0,01-10 s
TIG/MMA 0,01-10 s
TIG/MMA 1-99 %, min. 5 A
TIG 0-100 %, min. 5 A
TIG/MMA 16 (H & HP-modèles)
8 (E-modèle)
WARRANTY
All MIGATRONIC machines carry a twelve-month
guarantee against hidden defects. Such defects must be
notified no later than two months after it has been
noticed. The warranty runs for twelve months after
invoicing to end customer.
The warranty covers material and manufacturing faults
that cannot be immediately acknowledged.
Lapse of warranty
The warranty covers no obvious product characteristics,
which in time are thought as being inconvenient.
Incorrect installation
The warranty does not cover defects due to incorrect
installation of the product, e.g. connection to the wrong
mains voltage.
Incorrect or abnormal use of the product
The warranty does not cover use of the product for other
purposes than it has been designed for.
Lack of maintenance
There is a lapse of warranty if the product is not properly
maintained. E.g. if the product is dirty to such a degree that
cooling is hindered. The warranty does not cover damages,
which can be traced back to unauthorised and lacking re-
pairs of the product.
Over loading/extreme loading
The warranty does not cover over loading or extreme
loading. Nor transport damages, damages due to incorrect
handling, drops etc. The warranty does not cover abnormal
conditions as regards temperature, moisture or environ-
mental loading above the limit, which the machine has
been designed for.
Defects due to infestants
The warranty does not cover defects due to infestants.
Wear parts
The warranty does not cover parts of the product, which is
exposed to wear and tear, e.g. the welding torch and
welding cables. The warranty does not cover depreciation
due to normal use, e.g. scratches, rust and mechanical
damage. Welding cables and welding hoses are regarded
as wear parts and therefore not included in the warranty.
Resulting damages
Use of the product must stop immediately after acknow-
ledge of a defect in order to avoid further damage of the
product. The warranty does not cover resulting damages
due to use of the product after acknowledge of a defect.
Moreover, the warranty does not cover resulting damages
on other items due to product defect.
42