Machine Programme / Initial Operation - Migatronic PI 250 Manuel D'instructions

MACHINE PROGRAMME
PI 250/350/500 MMA is a three-phased welding
machine for MMA welding. The machine is air-cooled.
PI 350 MMA CELL is a three-phased welding machine
for MMA welding with cellulose electrodes. The
machine is air-cooled.
Welding hoses
The machine can be equipped with electrode holders
and return current cables from the MIGATRONIC
programme.
Trolley (option)
The machines can be delivered with transport trolley
as option.
PI 350/500 MMA and PI 350 MMA CELL can be
delivered with a simple 4-wheel transport trolley or a
transport trolley with built-in tools tray, torch holder
and room for welding consumables.
PI 250 MMA can be delivered with a transport trolley
with built-in tools tray, torch holder and room for
welding consumables.
INITIAL OPERATION
Mains connection
The machine must be connected to a mains supply
and protection earthing. After the mains plug (1) has
been connected to the mains the machine is ready for
use. Please note that all cable connections must be
made by authorised and qualified staff. Switch on and
off the machine by means of the breaker (2).
PI 250 MMA
PI 350/500 MMA
PI 350 MMA CELL
7