Steering Adjustment; Maintenance And Cleaning; Disposal Of Old Electric Parts - Siku RACING 6810 GT Challenge Mode D'emploi

8. Steering adjustment

If the model no longer drives straight ahead correctly,
you can adjust the steering as follows:
1. Switch on the vehicle by moving the switch to the
"ON" position.
2. Press and hold the buttons
control module simultaneously.
3. Switch on the remote control module by pressing the
button .
4. Release the buttons when a connection between the
model and the remote control module has been es-
tablished (continuous illumination of the headlamps).
5. Now adjust straight-ahead travel via the
buttons. (Tip: drive forward during the adjustment)
6. Switch off the model and remote control module.
7. Switch on the model and remote control again to
resume normal use.

9. Maintenance and cleaning

Use only dry and dust-free cloths to clean and care for
the SIKU products.
In order to guarantee the design-related safety level of
this model in the long term, the model must be checked
regularly for any visible damage by an adult.
and on the remote
and
10. Disposal of old electric devices
When they have reached the end of its service life, these
products cannot be disposed of with ordinary solid do-
mestic waste. They must be deposited at a collection
point for recycling of electrical and electronic equip-
ment. This is indicated by the symbol on the product, in
the instructions for use or on the packaging. The mate-
rials are recyclable as specifi ed by their identifi cation.
You make a major contribution to the protection of our
environment by recycling, salvaging materials or reus-
ing spent goods in other ways. Please consult your local
authorities about the waste collection point in your area.
Sieper GmbH
Schlittenbacher Str. 60
58511 Lüdenscheid
Germany
GB
13