Publicité
Les langues disponibles
Les langues disponibles
4
INTRODUCTION: THE OXFORD/HOYER ADVANCE PATIENT LIFT
ABOUT YOUR LIFT
Statement of Intended Use:
The intended use of the lifting device is to transfer an individual from one resting sur-
face to another (such as a bed to a wheelchair). Moving a person in a sling over ANY
distance is not recommended.
The Oxford/Hoyer Advance is available in two versions, hydraulically operated and elec-
trically operated. This manual covers both Advance models. Each lift is fully assembled,
load tested and certified before being packed/shipped.
The packing consists of a strong, purpose built carton and is used for both export and
domestic markets to ensure the safe arrival of the lift. A number of documents are sup-
plied in a wallet packed with each lift and should be kept safely for future reference.
TEST CERTIFICATE
•
DEALER GUARANTEE CARD
•
The TEST CERTIFICATE is an important document and should be kept for reference pur-
poses. To properly maintain your lift please refer to the maintenance schedule included
in this document. If you are at all unsure what your country's servicing requirements
are, please check with your dealer and/or a local government agency.
The Oxford/Hoyer Advance is suitable for the following CATEGORIES of lift within the
working parameters of the lifts specified in the TECHNICAL SPECIFICATIONS.
Category A - Wheelchair
Category B - Bed
Category C - Bath (dependent upon setting)
Category D - Toilet/Shower Chair
Category E - Floor
Category F - 90 degree Rotation
The Oxford/Hoyer Advance is suitable for patients in the SITTING, SITTING/RECUMBENT
and RECUMBENT positions. The slings suitable for this device are listed as follows
Oxford/Hoyer Quick fit sling
Oxford/Hoyer Full back sling
Oxford/Hoyer Quick fit deluxe sling
Oxford/Hoyer Long seat sling
Oxford/Hoyer Access sling
The CE mark:
The Oxford/Hoyer Advance carries the CE mark and complies
with the following EC directives:
• Medical Device Directive (93/42/EEC)
• EMC Directive (89/336/EEC) (Electrics only)
• Low Voltage Directive (73/23/EEC) (Electrics only)
294000.10003 Rev. B
E n g l i s h
USER MANUAL
•
CUSTOMER SATISFACTION CARD
•
E n g l i s h
ASSEMBLY AND COMMISSIONING INSTRUCTIONS
CARTON CONTENTS
Place the carton in a clear working area and open carefully. The carton contains:
•
OXFORD/HOYER ADVANCE
WALLET CONTAINING DOCUMENTS
•
HANDCONTROL (electric only)
•
BATTERY PACK (electric only)
•
BATTERY CHARGING LEAD (electric only)
•
HYDRAULIC UNIT (hydraulic only)
•
SAFETY NOTE–
The Oxford/Hoyer Advance is heavy and will need to be lifted with care. You may
need assistance to lift the Oxford/Hoyer Advance from the carton.
ASSEMBLY INSTRUCTIONS
1.
Remove all the parts from the carton and place on the floor, taking care to protect
the finish from damage.
Lift the Advance carefully from the carton. Stand the lift in the upright position (in a
triangular stance).
2.
Release the leg and mast assembly by unfastening the restraining strap from the
wheels. This strap will retract neatly into the top of the mast section.
5
294000.10003 Rev. B
Publicité
Chapitres
