Instructions for use: rigid medical endoscopes
6. Description
6.1.
Construction
6.2.
Markings
- Article number
- Serial number
- CE mark with identification number of the notified body where applicable: endoscope conforms to the require-
ments of the guideline 93/42/EEC
- For autoclavable endoscopes: writing «autoclavable»
- Specification of the direction of view
- Writing GERMANY
- Writing Delmont imaging
- For large-screen lenses: writing HM
- For high-resolution optics developed specifically for the latest Full HD camera generations: writing
- For endoscopes of the third Delmont imaging HD generation: writing 4K
6.3.
Available designs and sizes
The endoscopes are available in the following designs and sizes:
- straight endoscopes,
- angled endoscopes,
- endoscopes with working channel,
- sheath diameter 2,7–11mm,
- working channel diameter 5,1–6,4mm.
6.4.
Combinable products
You can combine the endoscopes with existing camera systems and with illumination fibres and instruments
from Delmont imaging.
D900 700 023 D
1. Distal end
2. Sheath
3. Main part
4. Ocular funnel
5. Proximal end
6. Irradiation surface of the illumination fibres
7. Connection for illumination fibre, type ACMI
8. Adapter for illumination fibre, type Wolf, pre-assembled
9. Adapter for illumination fibre, type Storz / Olympus (assem-
bly, see "Assembly" on page 10.)
10. For endoscopes with working channel: adapter with
stopcock (disassembly, see "Disassembly" on page 11.)
Rev 10/2018
delmont
imaging
5