Put into operation
∙ Place the inner pot in the appliance. Never use the device without the inner pot! Do
not put other pots onto the bottom heating!
∙ When using the stirrer (no 5), insert the gear-wheels into the driving gear (no 13).
∙ Then put the food into the device and lose the lid.
∙ Plug in the device and switch it on with the on/off switch (no 14).
∙ Press the temperature button no 1. Set the desired temperature (60 – 230°C) using
the +/- buttons. The LED no 5 shines.
∙ Press the timer button no 3. Set the desired time (02 – 180 min.) using the +/- but-
tons. The LED no 4 shines.
∙ Press the start/stop button no 7, the device starts working.
∙ The halogen heater and the bottom heating clock depending on the temperature.
∙ The device can also work without a set time and then turns off automatically after
180 minutes.
∙ The bottom heating no 2 can be turned off with button no. 2.
∙ If the stirrer is not used, the food can also be stirred with a silicone spoon. If the lid
is opened, the micro-switch shuts off the device. After the lid has been closed, the
program continues.
∙ Once the time run out, a beep will sound. Check the cooking result and extent the
cooking time if necessary. The ventilation for cooling the device keeps running for
about 5 minutes.
∙ Remove the inner pot with oven gloves and put it on a heat-resistant surface.
∙ Turn off the device with the on/off switch and unplug it.
Tips:
∙ Adding 1 – 2 tbsp of oil, the cooking time will be reduced and it gives a crisper fin-
ish.
∙ In order to achieve crispy fries, you should use max. 500g of frozen fries.
∙ Ready-made dough makes it easier and faster to prepare pizza or filled snacks.
27