Steba HF 2050 Fry'n Cook Mode D'emploi page 25

∙ Before initial use: clean all parts carefully and leave to dry.
Heat up the device for about 15 min. to eliminate the smell of
newness.
∙ Attention! Device gets hot. Danger of burns!
Touchable surfaces will be hot during operation! Place
the device on a flat and insensitive surface with and
keep a distance of at least 70cm to burnable materials.
∙ During operation steam emerge. Keep hands and face away.
Watch out for steam during cooking and when you pull out the
pot. Take appropriate distance to wall cupboards to avoid dam-
age of the veneer.
∙ If an extension cable is used, it has to have a cross-section of
1,5mm²
∙ If a GS-tested 16 A multi-pin extension is used, it may not be
charged with more than 3680 watts due to fire hazard.
∙ Make sure that children do not tease the cable or that a trip
hazard occurs.
∙ The device must always be disconnected from the power supply
if it is not supervised and before assembling, disassembling or
cleaning.
∙ Hot steam may leave the louvers.
Never place any wet food into the device, thaw frozen
food slightly.
∙ Hygiene: Please always clean the device to avoid bacteria and
mold formation.
25