Accessories And Replacement Parts - Burkert 8201 Manuel Utilisateur

8. Accessories and replacement parts

The following accessories and replacement parts can be supplied.
Description
Adaptation set for connection DN25
1 screwed adapter M20 in 1.4404
4 threaded extension pieces M3
1 adaptation set DN25/M20
1 spacer tube, stainless steel 1.4571, 16 x 1.5, 69 mm long
2 reinforcement rings, PTFE, for spacer tube
1 union nut, stainless steel 1.4571, G 1 1/4
1 O ring, EPDM, 10.0 x 2.5 m
1 O ring, silicone, 20.0 x 2.5 mm
Adaptation set for connection EHEDG DN30
1 screwed adapter, stainless steel 1.4404, M20
4 threaded extension pieces M3
1 adaptation set DN25/M20
1 spacer tube, stainless steel 1.4571, 16 x 1.5, 69 mm long
2 reinforcement rings, PTFE, for spacer tube
1 union nut, stainless steel 1.4571, G 1 1/4
1 O ring, EPDM, 10.0 x 2.5 mm
1 O ring, EPDM, 23.39 x 3.53 mm
Adaptation set for Bürkert installation fittings Type 8200
1 screwed adapter, stainless steel 1.4404, PG13.5
4 threaded extension pieces M3
1 O ring, EPDM, 10.0 x 2.5 mm
Inspection set for pH sensor
4 reinforcement rings, PTFE, for spacer tube
2 O rings, EPDM, 10.0 x 2.5 mm
2 O rings, EPDM, 23.39 x 3.53 mm
2 O rings, silicone, 20.0 x 2.5 mm
Inspection set for electrolyte container
2 needles, stainless steel
1 O ring, silicone, 28.0 x 4.0 mm, blue
1 O ring, silicone, 8.0 x 1.5 mm transparent
1 clamp seal, NBR, DN 100
1 straight screw-in connection with O ring, PVDF, DN 4/6, G 1/4
Electrolyte infeed set
1 electrolyte hose, PTFE, 4.0 x 1.0 mm, 5 m long
1 hose connector with shut-off
1 hose connection with shut-off
Other replacement parts and accessories
Electrolyte 3 molar KCI, sterile in 1 litre plastic bottle
1 litre plastic bottle empty, suitable for filling with ethanol
Demineralised water, sterile in 1 litre plastic bottle
Attachment cable for pH electrode enamel, 3 m long
Attachment cable for pH electrode enamel, 5 m long
Part No.
554 866
554 873
554 862
554 876
554 877
554 883
554 852
554 854
554 853
554 855
554 856
8201 - 23