Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7
MainTenance, TrouBleshooTing
Danger!
Risk of injury from high pressure in the system or device.
▶ Before working on the system or device, switch off the pressure
and vent and drain lines.
Risk of injury due to electric shock.
▶ Before working on the system or device, switch off the power sup-
ply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for
electrical equipment.
If switched on for a prolonged time, risk of burns or fire due to
hot device surface.
▶ Keep the device away from highly flammable substances and media
and do not touch with bare hands.
Risk of injury from improper maintenance work.
▶ Maintenance may only be carried out by authorized technicians and
with the appropriate tools.
▶ Secure system against unintentional activation.
▶ Following maintenance, ensure a controlled restart.
8
spare parTs
Caution!
Risk of injury and/or damage due to the use of incorrect parts.
Incorrect accessories and unsuitable spare parts may cause injuries
and damage the device and the surrounding area.
▶ Use original accessories and original spare parts from Bürkert only.
Nut
Coil
Armature
english
12
Coil and armature can be
ordered complete by quoting
the identification number of the
device
(see type label).
Wearing part set on request.
7.1 Malfunctions
If malfunctions occur, check whether
→
the device has been installed according to the instructions,
→
the electrical and fluid connections are correct,
→
the device is not damaged,
→
all screws have been tightened,
→
the voltage and pressure have been switched on,
→
the pipelines are clean.
If the valve still does not switch, please contact your Bürkert Service
representative.
english
9
TransporTaTion, sTorage,
disposal
note!
Transport damage.
Inadequately protected devices may be damaged during transportation.
• Protect the device against moisture and dirt in shock-resistant
packaging during transportation.
• Prevent the temperature from exceeding or dropping below the
permitted storage temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location.
• Storage temperature -40...+80 °C.
Damage to the environment caused by device components
contaminated with media.
• Dispose of the device and packaging in an environmentally
friendly manner.
• Observe applicable disposal and environmental regulations.
Type 6011
11
Publicité
Table des Matières
