Mettler Toledo IND246 Guide D'installation page 36

IND246 Terminal Installation Manual
Ethernet
Ethernet Connections
The Ethernet option board (Figure 2-21) is positioned in position 2 on the Main
board. This port provides a 10 Base-T connection (10 Mb) connection for Ethernet.
The Ethernet connection is made via a standard RJ45 connector (indicated in
Figure 2-21) on the option board.
Important: When installing the Ethernet option, adhere the Ethernet label from
the kit to the enclosure near the Ethernet connector.
2-14
USB
Figure 2-20: Option Board Locations
Figure 2-21: Ethernet Connection Option Board
USB / DIO
COM2
COM2 / DIO
RJ45
connector