Mettler Toledo IND246 Guide D'installation page 13

Hazardous Areas
Power
Power Consumption
Display
Weight Display
Scale Types
Number of Cells
Number of Scales
Analog/Digital Update Rate
Load Cell Excitation Voltage
Minimum Sensitivity
Keypad
IND246 Terminal Installation Manual
IND246 Specifications
The IND246 terminal cannot be operated in areas
classified as Hazardous because of combustible or
explosive atmospheres in those areas. Contact an
authorized METTLER TOLEDO representative for information
about hazardous area applications.
AC version: Operates at 85–264 VAC, 49–61 Hz and
includes a power cord configured for the country of use.
Battery version: Operates from internal NiMH battery pack
Refer to Table 1-2 for details of the AC version. Values
shown are with internal COM2/DIO option and Ethernet
option installed and load cell input loaded with 8 x 350Ω
load cells.
Refer to Table 1-3 for details of the battery life for the
battery powered version.
Backlit 240 x 96 dot graphic LCD including weight
display, weight units, gross/net indication and graphic
symbols for motion and center of zero, SmartTrac, operator
prompts and data entry display. Update rate of 12 updates
per second.
Basic weight mode: 27 mm (1.1 in) high weight display
Application mode: 20 mm (0.8 in) high weight display
Maximum displayed resolution of 50,000 divisions.
Analog load cells
AC Version: From one to eight 350-ohm load cells (2 or 3
mV/V)
Battery Version: From one to four 350-ohm load cells (2 or
3 mV/V)
One
Internal analog: 366 Hz
AC Version: 10 VDC
Battery Version : 5 V DC
0.1 microvolt per increment
25 keys; polyester overlay (PET) with polycarbonate
display lens
1-3