Display And Keyboard; Display Layout; Front Panel Keys - Mettler Toledo IND246 Guide D'installation

Display and Keyboard

The IND246 terminal uses a graphic, transflective type Liquid Crystal Display
(LCD) with a white LED backlight. The front panel including the display and
keypad is shown in Figure 1-4.
System line
LCD display
Scale Function keys
Operational
keys
ON/OFF key

Display Layout

At the top of the display, a single system line displays terminal status and operator
error displays and messages. Time and date and the status of the Digital I/O can
be displayed in this area, when so configured in setup.
Below the system line is the weight display. During normal, basic weighing
operation, the IND246 terminal display shows the Gross or Net weight in the larger
28.5mm (1.1 in.) size. When one of the applications is running, the weight is
shown in 20mm (0.8 in.) high characters. Below the weight display is a single
line to display the weight units, the weight legend, the center of zero icon, weight
range and motion icon. Tare values also appear on this line, to the left of the
display.
At the bottom of the normal basic weighing display is a line used for data entry.
For display operation during setup, refer to Chapter 3, Configuration.

Front Panel Keys

The IND246 terminal provides a total of 25 keys as an operator interfaces. The
ON/OFF key, four scale function keys and three operational keys are positioned
under the display while the alpha-numeric keys are positioned to the right of the
display. The print/enter key and navigation keys are located at the bottom right of
the display. These keys are used to enter the setup menu, to navigate and select
IND246 Terminal Installation Manual
Figure 1-4: IND246 Front Panel Layout
Alphanumeric
keypad
Navigation
keys
Print/Enter key
1-11