Mettler Toledo IND246 Guide D'installation page 28

IND246 Terminal Installation Manual
18. Mark the position of the bracket mounting holes on the surface to which the
terminal will be mounted per the dimensions shown in Figure 2-9, or by
holding the terminal up to the surface and marking through the bracket holes.
19. The hardware to mount the terminal bracket is not included with the terminal—
it must be supplied locally. Ensure that the mounting hardware is capable of
supporting the weight of the terminal, which is approximately 2.6 kg (5.8 lb).
Using the locally supplied hardware, secure the terminal bracket to the surface.
2-6
Figure 2-8: Attaching the Wall-Mounting Bracket
Figure 2-9: Hole Pattern for Mounting Brackets