Adjusting The Audio Latency - Roland Edirol M-100FX Mode D'emploi

■ Adjusting the audio latency

When using the M-100FX in Advanced mode, you can change the driver settings to adjust the latency of the audio. To adjust
the latency, change the Buffer Size in the driver settings dialog box.
1.
As described in Opening the special driver settings dialog box (p. 167), open the "Driver Settings" dialog box.
2.
Adjust the driver buffer size.
The following setting will produce the shortest latency.
Windows:
Set "Audio Buffer Size" to the far left (Min).
Macintosh:
Set "Buffer Size" to the far left (Min).
3.
Click [OK] to close the driver settings dialog box.
4.
Restart the application that is using the M-100FX.
If you are using an application that has a function for testing audio devices, get it to perform its tests.
5.
Play back audio data on your application.
If interruptions occur in the sound, repeat this procedure, and gradually increase the buffer size specified in step 2 until
interruptions no longer occur.
* Depending on the application you are using, there may be a buffer size or latency adjustment function among the audio settings of the
application as well. For details, refer to the operation manual for your application.
Opening the special driver settings dialog box
If using Windows:
1.
Open the "Control Panel" and double-click "EDIROL M-100FX".
2.
The "EDIROL M-100FX Driver Settings" dialog box will appear.
* In Windows XP, click "Switch to classic view" to switch the display to the classic view. EDIROL M-100FX will not be displayed
unless the classic view is selected.
* In Windows Me, click "View all Control Panel options".
If using Macintosh:
Open the ASIO Control Panel from the Audio Settings dialog box of your ASIO-compatible application. The name of
the Audio Settings dialog box and the procedure for opening the ASIO Control Panel will differ depending on your
application. For details, refer to the operation manual for your application.
Using Advance mode
167