Roland Edirol M-100FX Mode D'emploi page 109

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Immediately after you have set the audio/voice effect knob to [1] NARRATION ENHANCER,
the effect will have the default settings (see diagram below, or p. 113) regardless of the actual
positions of effect knobs A and B and the effect balance knob.
Default settings for [1] NARRATION ENHANCER
fig.narration-1_70
fig.MEMO
Other effects can also be used to modify the character of the voice. For details on each
effect, readEffect types (p. 32). You can also try out many other possibilities as
described in Effect applications (p. 113).
7.
Set effect knobs A and B and the effect balance knob to the default
positions shown in the diagram above.
8.
While you speak into the mic, slowly adjust effect knobs A and B to
adjust the effect to your liking.
You may wish to practice your narration while watching the actual video.
9.
Begin editing your video while you add the narration.
You will probably want to use the following procedure.
Start recording on your video deck
Start playback on your video camera
Start recording your narration
Applying effects
The sound will become
clearer as you turn effect
knob A and effect knob B
toward the right. For
details on effects, refer to
Effect types (p. 32).
For details on operating
your video camera and
video deck, refer to the
owner's manual for your
device.
109

Publicité

Table des Matières
loading

Table des Matières