Accessories
Filter set, 2 pieces (part no. 40091-16800).
Figure 5
Truma CP plus
Truma CP plus digital control panel with automatic climate
control for the iNet-capable Truma heaters Combi and
Truma air conditioning systems Aventa eco, Aventa comfort
(from serial number 24084022 – 04/2013), Saphir comfort RC
and Saphir compact (from serial number 23091001 – 04/2012)
– The automatic climate control function automatically con-
trols the heater and the air conditioning system until the
required temperature is reached in the vehicle.
– Can be extended with the Truma iNet Box. With this, all
TIN bus-capable Truma appliances can also be controlled
via the Truma App
Figure 6
Truma iNet Box
The Truma iNet Box for simple networking and control of
Truma appliances with a smartphone or tablet computer
using the app.
– Simple installation and start-up via the Truma App
– Can be extended with the update function, which ensures
that it is always up to date
Figure 7
Troubleshooting
Error
Cause / Remedy
Device not cooling
– Thawing procedure in progress
– Remote control temperature
Device not heating
– Thawing process in progress
– Outside temperature below 4 °C
Device cooling / heat-
– Filter soiled, change filter
ing inadequately or
not at all
– External air routes soiled /
Moisture on underside
– Close windows and doors and
of air distributor
Water dripping out of
– Condensation trap on external
air distributor
– Seal between device and roof
– System at too much of an angle
Remote control
– Check batteries in remote con-
not working
Device not reacting
– Check whether there are ob-
to remote control
commands
– Is the remote control tuned to
If these actions do not remedy the problem, please con-
tact Truma Service.
setting reached or too high
(outside temperature between
4 °C – 7 °C)
blocked
select high fan level
unit blocked
not intact
trol and replace if necessary
structions between the remote
control and the IR receiver
the IR receiver? / Tune remote
control to IR receiver.
19