Tone Or Pulse Dialling Mode; Base Station Settings; Base Station Ringing Tone Volume; Handsfree Volume For Telephoning With The Base Station - switel D8555 Mode D'emploi

- Handset and Base Station Settings -
10.5

Tone or Pulse dialling mode

This feature enables the telephone to be operated in analogue exchanges
(PULSE) as well as in a new, digital exchanges (DTMF/TONE). Tone dialling
is set at the factory.
Select the setting [] (DTMF/TONE) or P (PULSE).
A [] or P
11

Base Station Settings

The following setting options are available for telephoning handsfree with the
base station.
11.1

Base station ringing tone volume

The volume of the base station can be set to one of three different levels.
+ or -
11.2

Handsfree volume for telephoning with the base station

The volume for telephoning handsfree with the base station can be set to one
of eight different levels.
+ or -
11.3

Flash time

As already mentioned in Chapter 9, various Flash times are available for
selection. The O button on the base station can be assigned with the
following Flash time: 100 ms or 300 ms
Select the setting 100 ms or 300 ms using the sliding switch on
the underside of the base station.
11.4 Tone or Pulse dialling mode
This feature enables the telephone to be operated in analogue exchanges
(PULSE) as well as in a new, digital exchanges (DTMF/TONE). Tone dialling
is set at the factory.
Select the setting T (TONE) or P (PULSE) using the sliding
switch on the underside of the base station.
Press for 3 seconds to select
the dialling mode
Press when the base station is
ringing
Press during the call
149