Deregistering Handsets; Internal Calls (Intercom Function) - switel D8555 Mode D'emploi

12.1.2 Registering other DECT-GAP telephones on the base station
In order to register a DECT-GAP handset from another manufacturer, follow
the instructions in the operating manual provided by the original manufacturer
and then press the Paging button i button on the base station for 10
seconds until the S LED flashes. The PIN code is "0000" and cannot be
changed.
12.1.3 Registering a handset on a DECT/GAP base station from
another manufacturer
Follow the instructions in the operating manual from the original manufacturer
to set the base station from the external manufacturer to Registration mode.
A and C
bS-_ M 1 to 4
PI~_ M
12.1.4

Deregistering handsets

It is not possible to complete the deregistration using the handset which is to
be deregistered.
Nand J
PI~_ M
HS_ M 1 to 5
The l icon flashes in the display of the deregistered handset.
The handset is thus degregistered and can no longer be used for
external or internal calls.
12.1.5 PIN code
The registration and deregistration of handsets are protected against
unauthorised use by a PIN code. The PIN code is "0000" and cannot be
changed.
12.2

Internal calls (intercom function)

As soon as two handsets are registered on a base station, they can be used
for internal calls.
F, M 1 to 5
The base station rings if an external call is received during an
internal call.
B
B
- Multiple Handsets -
Press simultaneously
Select a number for the base
station
Enter the PIN code of the
external manufacturer
Press simultaneously
Enter the PIN code
Select the handset
Press the button and dial the
internal number of the handset
required
End internal call
Take external call
151