Multiple Handsets; Registering And Deregistering Handsets - switel D8555 Mode D'emploi

12

Multiple Handsets

Up to five handsets can be registered on the base station. Each handset can
be registered on up to four base stations simultaneously (refer to Chapter 13).
The standardised GAP Standard enables SWITEL handsets and
even those from other manufacturers to be integrated in the
telephone system. In the same way, a SWITEL handset can be
registered on base stations from other manufacturers as long as
they comply with the GAP Standard.
The following options are available if two handsets are used:
S Internal calls between the handsets (intercom),
S External calls can be transferred from the handset,
S Incoming external calls are received on all handsets.
If one handset is currently using the outside line, no further
external call is possible.
GAP: Generic Access Profile = Standard for the interoperation of handsets
and base stations from other manufacturers.
12.1

Registering and deregistering handsets

12.1.1 Registering D8555 handsets
To register handsets, set the base station to Registration mode by pressing
the Paging button i. After having set the base station to Registration
mode, the handset must be registered within the following two minutes. The
PIN code is "0000" and cannot be changed.
i
A and C
bS-_ M 1 to 4
PI~_ M
Other handsets are automatically assigned an internal phone
number. The handset already registered has the internal call
number 1 H5-1 . The second handset registered is assigned the
internal phone number 2 H5-2 . These internal phone numbers
appear in the display.
150
- Multiple Handsets -
Press the Paging button for 10
seconds until the SLED
flashes
Press simultaneously
Select a number for the base
station
Enter the PIN code