- Handset and Base Station Settings -
10
Handset Settings
The following settings can be made on the handset.
10.1
Handset ringing settings
Different ringing melodies and volume settings can be set on the handset.
Nine different ringing melodies are available for the handset.
10.1.1
Setting the ringing melody
I
A or C, I
10.1.2
Setting the ringing tone volume
The volume can be set to one of five different levels or switched off
completely. o is the lowest volume which can be set and ooooo the
highest.
I
A or C o to
ooooo , I
10.2
Receiver and handsfree volume
The volume of the receiver and handsfree mode can be set to one of five
different levels. o is the lowest volume which can be set and ooooo the
highest. The volume can also be adjusted according to needs during a call
(refer to Chapter 5.13).
B or E, I
A or C o to
ooooo , I
10.3
Key tone
An acoustic signal is issued each time a button on the handset is pressed.
This key tone cannot be switched on or off.
10.4
Flash time
As already mentioned in Chapter 9, various Flash times are available for
selection. The A button on the handset can be assigned the following
Flash times: 5 (100 ms) or l (300 ms)
j 5 or l
148
Press for 3 seconds
Select the ringing melody and
confirm
Press
Select the volume and confirm
Press
Select the volume and confirm
Press for 3 seconds to select
the Flash time