Preparation For Use; Unpacking And Inspection Of Cannula; Power Requirements - CooperSurgical Endosee Manuel De L'utilisateur

Endosee System - User Manual
®

4 Preparation for Use

4.1 Unpacking and Inspection of the Cannula
Follow below to unpack, inspect, and install the
Cannula and the Display Module. Each single- use,
disposable cannula comes sealed in a pouch and is
Ethylene Oxide (ETO) sterilized (Figure 2). ESPX5
contains an individually wrapped cannula and an
individually pouched endometrial suction pipet curette;
ESPY5 contains only the individually wrapped cannula.
Check that the expiration date has not passed
before use.
Figure 2: Disposable Cannula in pouch
• Packing Materials: Save the packing materials for
potential future transportation and storage of the
Endosee System
• Inspection: Inspect all components for damage
during shipment, or discrepancies upon arrival.
Ensure there are no unintended rough surfaces,
sharp edges or protusions which may cause harm.

4.2 Power Requirements

The Endosee® System operates on DC voltage, from an
internal battery source. The Display Module must be fully
charged before the initial use.
• Connect the Display Module to the Docking Station,
as shown below:
Figure 3: Display Module connected to Docking Station.
.
®
15