Preparation For Use; Unpacking And Inspection Of Cannula; Power Requirements; Environmental Requirements - CooperSurgical Endosee Manuel De L'utilisateur

Hystéroscope
Masquer les pouces Voir aussi pour Endosee:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Endosee
Hysteroscope - User Manual
®

4 Preparation for Use

4.1 Unpacking and Inspection of Cannula

Follow below to unpack, inspect, and install the
cannula and the Endosee Hysteroscope. Each single-
use, disposable cannula comes sealed in a pouch and
is Ethylene Oxide (ETO) sterilized (Figure 2). Check
that the expiration date has not passed before use.
Figure 2: Cannula in a pouch
• Packing Materials: Save the packing materials
for potential future transportation and storage
of the Endosee Hysteroscope.
• Inspection: Inspect all components for damage
during shipment, or discrepancies upon arrival.

4.2 Power Requirements

The Endosee Hysteroscope operates on DC voltage, from
an internal battery source. The Handheld Monitor must be
fully charged before the initial use.
Place the Handheld Monitor on Charging/Docking
Station, and connect the two.
Attach power supply to the
Charging/Docking Station.
Plug the power supply to a wall outlet.
Continue to charge until the battery power
indicator on the touch screen monitor shows
100%, indicating that the battery is fully charged.
The Handheld Monitor is ready for use.

4.3 Environmental Requirements

All of the environmental requirements listed in the
Warnings and Precautions section must be met in the
location where the Endosee Hysteroscope is intended
to be operated for patient use. If ANY of the seen
environmental parameters are present, the Endosee
Hysteroscope should not be operated until modifications
to the environmental conditions are met.
13

Publicité

Chapitres

Table des Matières
loading

Table des Matières