Cannula Attachment And Removal To The Display Module - CooperSurgical Endosee Manuel De L'utilisateur
Système endosee avec canule qui est destiné à visualiser le canal du col de l'utérus, la cavité utérine ou les voies urinaires chez la femme, y compris la vessie afin d'effectuer un diagnostic chez une patiente externe ou dans un cabinet
Masquer les pouces
Voir aussi pour Endosee:
- Manuel de l'utilisateur (100 pages) ,
- Manuel de l'utilisateur (356 pages)
Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Endosee
System - User Manual
®
CAUTION:
!
substances to be spilled in or around the
cannula connector on the Handheld Display
Module, as damage to the electronics
may occur.
6.3 Cannula attachment and removal to the
Display Module
In preparation for use, attach the cannula to the electri-
cal connector on the Display Module per the following:
1. Peel apart the proximal end of the package and
remove the cannula.
2. Open Cannula Handle to the "Down" position
as shown as shown in Figure 7. Note that the
Display Module will not connect to the Cannula
unless the handle is in the "Down" position.
3. Align the connector faces of the Display Module
and Cannula, and slide the Display Module
onto the Cannula until the connectors are fully
attached together.
CAUTION:
!
between the cannula and the Handheld
Display Module during assembly, as damage
may occur.
Figure 7: Cannula and Display Module Attachment
Do not allow any fluids or
Do not misalign the connectors
22
Publicité
Chapitres
Table des Matières
Dépannage
