Endosee
System - User Manual
®
•
Do not allow any fluids or substances to be spilled
into or around the removable cannula connector on
the Display Module, as damage to the electronics
may occur.
•
Do not misalign the connectors between the
removable cannula and the Display Module during
assembly, as damage may occur.
•
When detaching the cannula from the Display
Module, be sure that fluid does not contact the
connector in the Display Module. Do not rotate
or twist the cannula while removing.
•
Do not alter the shape of the distal end of
the cannula.
•
No portion of the Endosee
opened for cleaning or disinfecting.
•
Do not pour water or any cleaning solution
directly onto Display Module during cleaning or
disinfection. Doing so may damage electronic
components and reduce product life.
•
Do not immerse any component of the Display
Module into solutions during the cleaning or
disinfecting processes, as damage to the
electronic components may occur.
WARNING:
!
stacked with other equipment should be avoided
because it could result in improper operation. If
such use is necessary, this equipment and the
other equipment should be observed to verify
that they are operating normally.
WARNING:
!
those provided by CooperSurgical, Inc. could
result in increased electromagnetic emissions or
decreased electromagnetic immunity of this
equipment and result in improper operation.
2.3 Battery and Power Supply
Comply with the following to prevent damage to
the battery:
•
Use only the power supply provided with the device.
Use of other chargers may damage the device and
will void the warranty.
System should be
®
Use of this equipment adjacent to or
Use of accessories other than
10