Endosee
System - User Manual
®
8. Open Windows File Explorer. Depending on your
PC's network configuration, an Endosee Device
may show up under "Network" in the File
Explorer window. If no ENDOSEE device is
detected, enter \\192.168.0.1 to the file explorer
address bar.
9. Open the ENDOSEE device to find a folder with
named with a Patient ID.
10. The files in the exam date folder are recorded
pictures and names end in "jpg."
11. Click folder named Preview
12. The files in the Preview folder are named by the date
and time and ends in "jpg."
13. Copy those files by selecting them and copying
them. The keyboard shortcut (command-A) marks
all the photos in a folder and the keyboard short
cut (command-C) copies them to the computer's
clipboard. Navigate to the folder where you want to
save patient pictures and paste (command-V) your
photos into place.
14. After you copy files or folders to the hard drive, it is
useful to view the hard drive to confirm that the files
are copied.
15. Do not erase photos from your memory card until
you have confirmed that you saved them on the
hard drive.
Download to a Mac via Docking Station
1. Plug Charging/Docking Station charge cable to
Display Module.
2. Connect the USB cable to the computer and
Charging/Docking Station.
3. Turn on Display Module power.
4. Boot up computer.
5. Click the Finder on the application dock.
6. The "ENDOSEE" device shows up as a removable
device. Open the ENDOSEE device to find a folder
named with a Patient ID.
7. The files in the exam date folder are recorded
pictures and names end in "jpg."
8. Click folder named Preview
34