Endosee
System - User Manual
®
9. The files in the Preview folder are named by the date
and time and ends in "jpg."
10. Copy those files by selecting them and copying
them. The keyboard shortcut (command-A) marks
all the photos in a folder and the keyboard
shortcut (command-C) copies them to the
computer's clipboard.
11. Navigate to the folder where you want to save
patient pictures and paste (command-V) your photos
into place.
12. After you copy files or folders to the hard drive, it is
useful to view the hard drive to confirm that the files
are copied.
13. Do not erase photos from your memory card until
you have confirmed that you saved them on the
hard drive.
Download to a Mac via WiFi
1. Turn on Display Module power
2. Ensure WiFi setting is Enabled (see section
6.6 – Touch Screen Functions – WiFi Passphrase)
3. Boot up computer
4. Check available networks on the computer
5. Select the Endosee Device. Endosee Device
should be identified as "ENDOSEE" followed by a
serial number for the device unit.
6. Type in the passphrase previously entered in
section 6.6 when prompted
7. ENDOSEE device should be connected wirelessly to
the computer
8. Click on Finder on the application dock and locate
the Endosee Device under "Shared" devices. If no
ENDOSEE device is detected, enter \\192.168.0.1 to
the finder address bar.
9. Open the ENDOSEE device to find a folder named
with a patient ID.
10. The files in the exam date folder are recorded
pictures and names end in "jpg."
11. Click folder named Preview
35