Bottom Mounting - Agilent Technologies TV 551/701 Navigator Notice De Mode D'emploi

17 Technical Information
TV 551/701 Controller Installation

Bottom Mounting

See the following figure.
1
2
3
4
5
6
7
Figure 53
312/328
Turn the pump upside-down;
Place the three fixing blocks with the through holes toward the inside, and
fix them with the three M6 screws to the pump bottom;
Place the controller on the blocks, with the pump cable toward the pump
body;
Fix the controller to the blocks by means of the three socket head screws
M5;
Turn the pump again;
Plug the line card and connect the pump cable to the pump;
Connect the mating connector with the jumper on the interlock signal to
start the pump.
TV 551/701 Navigator User Manual / 87-900-934-01 (P)