Vibration Isolator Installation - Agilent Technologies TV 551/701 Navigator Notice De Mode D'emploi

This vent valve has a fixed delay time of about 2.5 sec. This value can be used
only with rack controller.
To install the vent valve execute the same steps as the vent valve model
9699834 (see the above paragraph).

Vibration Isolator Installation

Six vibration isolators for ISO and CFF inlet flange version pumps are
available as accessories.
The four model part numbers are the following:





They typically reduce the vibration transmitted from the TV-551/701 Navigator
to the system by a factor of 20.
Please refer to the relevant instruction manual.
TV 551/701 Navigator User Manual / 87-900-934-01 (P)
model 9699345 for ISO 160 flange;
model 9699346 for ISO 200 flange;
model 9699334 for CFF 6" flange;
model 9699335 for CFF 8" flange;
model 9699336 for CFF 10" flange.
Technical Information

Vibration Isolator Installation

17
309/328