How To Connect The Output Open Collector Of The Controller - Agilent Technologies TV 801 Navigator Bolted Flange Notice De Mode D'emploi

Figure 13
How to Connect the Output Open Collector of the
Controller
Here below there are the typical connections of the open collector
input of SQ 337 to an external system. Two cases are considered:
Please note that on the connector a 24 Vdc, 60 mA voltage, a
GROUND signal and the open collector pin are available.
TV 801 Navigator Bolted Flange User Manual / 87-900-980-01 (D)
1. the customer supplies the 24 Vdc
2. the customer does not supply the 24 Vdc.
Technical Information
J1 - In-Out
223/248
17