• Do not turn the camera off or remove the
lens from the camera while vibration
reduction is operating. Failure to observe this
note could result in the lens sounding and
feeling as if an internal component is loose or
broken when it is shaken. This is not a
malfunction. Turn the camera on again to
correct this.
• With cameras featuring a built-in flash,
Jp
vibration reduction does not function while
En
the built-in flash is charging.
De
• When the camera is mounted on a tripod, set
Fr
the vibration reduction ON/OFF switch e to
Es
OFF. However, it is recommended that the
Se
switch be set to ON when using the camera
Ru
on an unsecured tripod head or with
Nl
monopod.
It
• With autofocus cameras such as D2-series
Ck
and D300 models, featuring an AF-ON
Ch
button, vibration reduction does not
Kr
function when the AF-ON button is pressed.
20
Setting the aperture
Use the camera to adjust the aperture setting.
Variable maximum apertures
Zooming the lens from 16mm to 85mm
decreases the maximum aperture by 1
However, the camera will compensate for any
change in aperture by adjusting the shutter
speed so as to maintain the correct exposure
value.
1
/
stop.
3