B.Braun Aesculap Système de cadre activO Mode D'emploi page 5

Available sizes
Art. no. Designation
BV399R Forceps for changing the blades
BV858R Connecting piece with quick-release
coupling
BV859R Coupling piece short
BV860R Coupling bar 150 mm
BV861R Coupling bar 200 mm
BV862P Radiolucent valve: Size S-green
BV863P Radiolucent valve: Size S-yellow
BV864P Radiolucent valve: Size L-blue
BV865SU Fixation screw: Size S-green
BV866SU Fixation screw: Size M-yellow
BV867SU Fixation screw: Size L-blue
BV868R Screwdriver for fixation screws
BV869R Fastening clamp
BV899R T-wrench
OP803 OP field illumination bar 100 mm
Safe handling and preparation
CAUTION
Federal law restricts this device to sale by, or on
order of a physician!
Note
Use of the activO frame system requires precise knowl-
edge about the biomechanical situation at the spine.
►
Ensure that the product and its accessories are
operated and used only by persons with the requi-
site training, knowledge, or experience.
►
Read, follow, and keep the instructions for use.
►
Use the product only in accordance with its
intended use, see Intended use.
►
Remove the transport packaging and clean the new
product, either manually or mechanically, prior to
its initial sterilization.
►
Store any new or unused products in a dry, clean,
and safe place.
►
Prior to each use, inspect the product for loose,
bent, broken, cracked, worn, or fractured compo-
nents.
►
Do not use the product if it is damaged or defec-
tive. Set aside the product if it is damaged.
►
Replace any damaged components immediately
with original spare parts.
►
Do not use products that are in open or damaged
sterile packaging.
►
Do not use the product after its use-by date.
The products BV865SU, BV866SU and BV867SU are
sterilized by radiation and are supplied in sterile pack-
aging.
The product must not be reused.
►
Do not re-sterilize the product.
3