B.Braun Aesculap Système de cadre activO Mode D'emploi page 4

®
Aesculap
activO frame system
Legend
A Connecting piece with quick-release coupling
B Coupling bar
C Coupling piece short
D Radiolucent valve
E Fixation screws
F Screwdriver for fixation screws
G Fastening clamp
H T-wrench
I OP field illumination bar
J UNITRAC universal holder
K Forceps for changing the blades
Symbols on product and packages
Sterilization using irradiation
Not for reuse in intended appli-
cations as defined by the manu-
facturer
Use by
Caution, general warning symbol
Caution, see documentation sup-
plied with the product
2
® Applicable to
activO frame system Aesculap
►
For item-specific instructions for use and informa-
tion on material compatibility, see also the
Aesculap Extranet at www.extranet.bbraun.com
Intended use
The Aesculap activO frame system is used to keep free
a ventral or ventrolateral approach to the spine.
With this system, valves can be placed at any position
on the ring and fastened on the spine, using fixation
screws.
Illumination and optics elements can be adapted, too.
The frame can be fastened to the operating table (see
instructions for use TA011611 or TA009150 respec-
tively). In the latter configuration, fixation with fixa-
tion screws on the spine is not required.