Maintenance Table - Stiga R72 Li 48 V1 Manuel D'utilisation

The warranty only applies to machines
subjected to regular maintenance.
The user must follow all the instructions
provided in the accompanying documentation.
The warranty does not cover
damages resulting from:
• Failure to become familiar with the
documentation accompanying the
machine (Instruction manual).
• Professional use.
• Carelessness, negligence.
• External causes (lightning, impact,
presence of foreign bodies inside
the machine) or incidents.
• Incorrect use or assembly or
prohibited by the manufacturer.
• Poor maintenance.
• Modification to the machine.
• Use of non-genuine spare
parts (adaptable parts).
• Use of attachments not supplied or
not approved by the manufacturer.

14. MAINTENANCE TABLE

Use the boxes at the side to note the date or number of operating
hours when the intervention was performed.
Intervention
Check all fasteners
Tyre pressure check
Safety checks/check controls
Check the drive release lever
Battery charge level
General cleaning and inspection
Checking for any damage to the
machine. If necessary, contact
the authorised service centre.
Cutting means positioning
and sharpening check
Replacing cutting means
General lubrication
Check/clean the battery
ventilation filters
* This operation must be carried out by your Dealer or an Authorised Service Centre.
** General lubrication of all joints should also be carried out whenever
the machine is to be left unused for a long period
The warranty does not cover:
• The routine/occasional maintenance
operations (described in the owner's manual).
• Normal wear and tear of consumables
such as cutting means, wheels,
beacons, safety bolts and wiring.
• Normal wear and tear.
• Deterioration in the appearance
of the machine due to use.
• Cutting means supports.
• Any accessory expenses related to the
enforcement of the warranty, such as costs
incurred to travel to the user's location,
transfer of the machine to the Dealer,
rental of replacement equipment or calling
of independent enterprises to perform
maintenance work.
The user is protected by his or her own national
legislation. The purchaser's rights under the
national laws or his or her own country are
not in any way restricted by this warranty.
Frequency
(hours)
Before each use
Before each use
Before each use
Before each use
Before each use
After each use
Before storage
After each use
After each use
25
100
25
Annual
EN - 26
Performed (Date or Time) Notes
par. 7.1.3
par. 7.2
par. 6.3
par. 8.2
par. 8.3
*
*
par. 8.4 **
para. 8.3.5