Routine Maintenance; Maintenance Recommandations; Scheduled Maintenance Table - Stiga Autoclip M3 Manuel D'utilisation

ROUTINE MAINTENANCE

Important
During maintenance, use personal protection equipment indicated by the Manufacturer, especially when
working on the blade. Before carrying out any type of maintenance, make sure the robot is turned off (see
"Robot Safety Stop").
Frequency
Weekly
Monthly
Once a year and at the end
of the mowing season

MAINTENANCE RECOMMANDATIONS

SCHEDULED MAINTENANCE TABLE

Part
Blade
Battery charging knobs
Contact plates
Rain sensor
Robot
Robot
Type of maintenance
Clean and check the
efficiency of the blade. If the
blade is bent or very worn,
replace it
Clean and remove any rust
Clean and remove any rust
Clean and remove any rust
Clean the robot
Have the robot serviced at
an authorised service centre
27
Reference
See "Robot Cleaning"
See "Blade Replacement"
See "Robot Cleaning"
See "Robot Cleaning"
See "Robot Cleaning"
See "Robot Cleaning"
See "Prolonged inactivity
and restarting"
User's manual
EN