Support; Disposal; Information For Test Institutes - Franke SMART PLUS SMP 86 M F Série Manuel D'installation Et D'utilisation

Masquer les pouces Voir aussi pour SMART PLUS SMP 86 M F Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34

SUPPORT

In the event of any operation problems, contact
a Franke Technical Service Centre (refer to the
attached list).
Never use the services of unauthorised
technicians.

DISPOSAL

Information for users
The symbol on the product or on the
packaging indicates that the device must
not be disposed of in the domestic waste.
By disposing of the device in a proper way you help to
avoid harmful consequences to environment and health.
Further information about recycling the device is
available from the competent authority, the local
refuse disposal service or the vendor of the device.
Dispose of the device, which is to be discarded, via a
specialised waste collection point for electronic and
electrical devices.
In accordance with the Directive 2012/19/EU,
regarding the reduction of the hazardous substances
used in electrical and electronic appliances, and
waste disposal.
SMP 86 M _/F
Specify:
– the type of fault;
– the appliance model (Art./Cod.);
– the serial number (S.N.).
The barred dustbin symbol on the appliance indicates
that at the end of its working life the product must
not be disposed of as household waste.
Consequently, when the appliance has reached
the end of its working life the user must take it
to a suitable recycling centre for electronic and
electrotechnical waste, or return it to the dealer
when purchasing a new appliance of equivalent type.
Proper separate waste collection of the scrapped
appliance for subsequent recycling, treatment and
environmentally-friendly disposal helps prevent a
potentially negative impact on the environment and
health and facilitates recycling of the materials used
in appliance construction.

Information for test institutes

To calculate the volume, remove the internal wire
side runners, if present (according to standards
2009/60350-50304/EN).
– 15 –
This information is given on
the appliance dataplate on the
warranty certificate.
EN

Publicité

Table des Matières
loading

Table des Matières