Troubleshooting; Support - Franke FMY 98 P XS Manuel De L'utilisateur

TROUBLESHOOTING

Problem
The oven is not working�
The door will not open�
The display shows the letter "F"
followed by a number�

SUPPORT

In the event of any operation problems, contact a Franke
Technical Service Centre�
Never use the services of unauthorized technicians�
Specify:
- the type of fault
- the appliance model (art�/Code)
- the serial number (S�N�) on the rating plate, located
on the right hand edge of the oven cavity (visible
when the oven door is open)�
001
Possible cause
Power cut.
Disconnection from the
mains.
Cleaning cycle in progress.
Fault with the door lock.
Software problem.
When contacting our
Service Centre, please
state the codes provided
on your product's
identification plate�
Solution
Check for the presence of mains electrical power
and whether the oven is connected to the
electricity supply.
Turn off the oven and restart it to see if the fault
persists.
Wait for the function cycle to end and the oven
to cool down.
Turn off the oven and restart it to see if the fault
persists.
Contact you nearest Client After-sales Service
Centre and state the number following the letter
"F".
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXX X X X X X XXX XX XXXX X X X
EN
XXXXXX XXXXXX XXXXX XXXXXXX
Model: xxxXXXXxx
XXXXXX
15