MSA Orion G Mode D'emploi page 60

Chapter 6, Warranty, Maintenance and Troubleshooting
Table 6-1. Troubleshooting Guidelines
PROBLEM
Does not turn ON
Does not complete Self-Tests
Display segments missing or
stuck
"ERROR" message after battery
installation
"ERROR" message during use
Battery pack does not hold
charge
Combustible sensor does not
calibrate
Oxygen sensor does not
calibrate
Toxic sensor does not calibrate
Clock not holding time.
*
Recharge or replace the cells before replacing battery pack.
In all of the above cases and for any other problems, you may return the Orion
G Multigas and Leak Detector to MSA for repairs.
6-6
REPLACE
BATTERY DISPLAY SENSOR
*
PACK MODULE
•
•
•
•
•
•
Operating Manual
MAIN
ELECTRONICS
MODULE
•
•
•
•
•