Maintenance; General Information; Cleaning; Functional Test - SKF TLMR 101 Notice De Montage

EN

9. Maintenance

9.1 General information

The manufacturer shall not be held liable for
damages resulting from improperly perfor-
med assembly, maintenance or repair work
on the product.

9.2 Cleaning

• Thoroughly clean all outside surfaces. Do
not use aggressive cleaning agents. Inte-
rior cleaning normally is not necessary.
34
9.3 Maintenance
The TLMR requires almost no
maintenance.
Still when replacing a cartridge the TLMR
should be checked for proper functioning
and damages.

9.4 Functional test

• Loosen lubricant feed line from TLMR.
• Switch TLMR off and on again (trig-
gering an additional lubrication cycle).
Repeat procedure if required.
• Reinstall lubricant feed line.
9. Maintenance

9.5 Inspection for damages

• All seals
• Bayonet plug
• Bracket
• Drive unit
• If applicable, battery lid