Residual Risks - SKF TLMR 101 Notice De Montage

1. Safety instructions
1.12

Residual risks

Residual risk
Life cycle assembly, malfunction, troubleshooting, repair, maintenance
Electric shock due to defective connection
cable
People slipping due to floor contamination
with spilled/ leaked lubricant
Tearing/ damage to lines when installed on
moving machine components
Life cycle start-up, operation
Electric shock due to defective connec-
tion cable
Lubricating oil spraying out due to faulty
component fitting/line connection
Life cycle adjustment, shutdown, disposal
People slipping due to floor contamination
with spilled/ leaked lubricant
Remedy
• Check connection cable for damages
• Exercise caution when connecting the product's hydraulic connections
• Promptly apply suitable binding agents and remove the leaked/ spilled lubricant.
• Follow operational instructions for handling lubricants and contaminated parts
• If possible, do not install on moving parts; if this cannot be avoided, use flexible hose
lines.
• Check connection cable for damages
• Tighten all components securely or using the specified torques. Use hydraulic con-
nections and lines suitable for the indicated pressures. These must be checked for
proper connection and for damage prior to commissioning.
• Exercise caution when disconnecting the product's hydraulic connections
• Promptly apply suitable binding agents and remove the leaked/ spilled lubricant
• Follow operational instructions for handling lubricants and contaminated parts
EN
1
13